LN 277/2006
The main aim of this Legal Notice was to encourage the reducing, reusing and recycling of waste. In fact, as a first priority, it aims at preventing the production of packaging waste, and then sets additional fundamental principles such as the reuse of packaging, the recycling and also other forms of recovery of packaging waste. Hence, it ultimately aims at reducing the final disposal of waste. This legal notice, in fact, provides additional measures, procedures and guidance to the Waste Management (Permit and control) Regulations of 2001.
These regulations apply to all packaging put on the market in Malta and all packaging waste, whether it is used or released at industrial, commercial, office, shop, service, household or any other level. These regulations are valid regardless of the material used, unless such packaging is expressly excluded from the application of these regulations. Categories of packaging include glass, aluminium steel, paper and fibreboard, plastics, wood and textiles. An item of packaging waste is deemed to be comprised of the constituent material which is proportionally largest by weight.
The yearly targets, which are set as a percentage of all packaging waste generated, are increasing on a yearly basis (as per table attached with this article) and it is of paramount importance to have systems and schemes in place that facilitate the recovery of waste in order to reach these targets.
Technically, the polluter pays and the producer responsibility principles should make sure that these targets are reached. “Producers”, according to the law, means any person in Malta who puts packaging or packaging material on the market for the first time within the territory of Malta on a professional basis. However, the government through WasteServ Malta Ltd., embarked on a series of initiatives in order to facilitate and encourage packaging waste recovery and recycling. This includes the upgrading of local facilities where these already existed and the setting up of new ones to complement them.
Bring-in sites
In collaboration with local councils, WasteServ has introduced Bring-In Sites for the general public’s disposal of this packaging waste. Through these facilities, the public can deliver clean, source-segregated recyclable materials. These Bring-In Sites consist of a number of containers to cater for the separate collection of four different waste fractions, namely plastic, paper, glass and metal.
Response from the public to the introduction of these facilities was very positive, and the rate of participation has increased steadily. In fact, 1,788 tonnes were collected in the 2005, 2,255 tonnes in 2006, 2,810 tonnes in 2007 and in 2008 by the end of September, the amount reached was that of 3,128 tonnes. Materials from these Bring-In Sites are collected separately so that they are then further sorted manually and sent for recycling to various companies, both locally and abroad.
Civic amenity sites
The introduction of the new Civic Amenity Sites for separated bulky waste has also been highly successful and has led to a reduction in the amount of waste entering the landfill. These sites are centres where householders can conveniently dispose of their waste separately in different containers. These include separate units for waste fractions such as furniture, appliances, mattresses, household hazardous waste including spent medicines and used syringes, wood, waste resulting from DIY work and cardboard.
This is another tangible result of waste minimisation and recycling initiatives introduced by WasteServ, with the aim of reducing the amount of waste being sent to landfills and increase the recycling of such materials. There are currently three Civic Amenity Sites in operation, which are situated in the localities of Maghtab, Mriehel and Hal Far. Two others, in Luqa and Gozo, are now fully developed and shall be operational soon. It is to be noted that by the end of September 2008, the landmark of 100,000 vehicles visiting these sites was reached, with around 18,800 tonnes of separated waste collected since they started operating. It is important to note that secondary and tertiary packaging is very common in the separate waste collected at these facilities. The WEEE products are also commonly disposed frequently at these sites, and these include monitors, televisions, fridges, personal computers and other domestic appliances.
The Bring-In Site and Civic Amenity Site projects were co-financed through the European Regional Development Fund (ERDF).
Material recovery facility
In the meantime, the Material Recovery Facility (MRF) at the Sant’Antnin Waste Treatment Plant was also officially inaugurated earlier this year. This facility is the place where manual sorting of dry recyclable waste recovered by the separation at source, including products received from the Bring-in Sites and Civic Amenity Sites, is being done before it is sent for recycling.
This Material Recovery Facility was the long awaited facility to support the sorting of all the waste collected and is an essential counterpart to all other waste separation initiatives. This facility is capable of processing and treating 36,000 tonnes of recyclables annually and is part of a larger upgrading project for which WasteServ has secured e16.7million EU co-funding from the European Union Cohesion Fund.
Schemes
Recovery schemes for packaging waste should be the way forward, and the Government even took the initiative of introducing the Irricikla t-Tlieta system. In fact, as stated when the scheme was initiated, this shall now start being managed through eco-contributions diverted by producers themselves to these kinds of waste recovery schemes.
These recovery schemes for packaging waste need a valid waste management permit under the Waste Management (Permit and Control) Regulations, 2001. This permit is provided by the relevant Competent Authority (Malta Environment and Planning Authority).
Conclusion
These are some of the current initiatives taking place in order to reach the targets on LN 277/2006. There is a lot more to be done, and when one acknowledges the current constraints and circumstances, one may appreciate the uphill Malta still needs to go through, which is ultimately being done for the benefit of our environment.